Code NUPROL-BATL-INSE-MC
£0.00
£20.00
Click the image to enlarge
Code NUPROL-BATL-INSE-MC
£0.00
£20.00
SAVE
Earn 0 reward points with this product.

Sorry we're out of stock!

Enter your email address below and we’ll notify you as soon as it becomes available.

  • Description
    • Anti-Fog
    • Anti-Scratch Lense
    • Elastic headband
    • UV400 Protection
    • Includes protective sleeve
    • Conforms to CE EN166 standards


    EN
    MAINTENANCE OF EYE PROTECTOR
    This eye protection should be stored away from direct sunlight and abrasive chemicals.
    The lens should be cleaned with a soft cloth and water.
    This eye protection can be disinfected with any common household disinfectant.
    This eye protection should be inspected frequently and replace worn, pitted or damaged parts.

    FRAME MARKING
    The marking on the frame shows:
    "Identification of the distributor/maker” "Number of the EN standard" “Fields of Use” "Symbol for Impact resistance (see below)" "Certification Mark"


    Fields of Use
    NONE - General use
    3 - Liquid droplets or splashes
    4 - Large dust particles > 5 μm
    5 - Gases and small dust particles < 5 μm
    8 - Short circuit electric arc
    9 - Molten metal and hot solids


    Impact Resistance (Mechanical Strength)
    F - Low energy impact resists a 6mm, 0.86g ball at 45m/s
    B - Medium energy impact resists a 6mm, 0.86g ball at 120m/s
    A - High energy impact resists a 6mm, 0.86g ball at 190m/s
    S – Increased strength
    Please Note: If the impact letter is NOT followed by the letter “T”, then the eye protection shall only be used at room temperature and NOT extreme temperatures.


    LENS MARKING
    The lens is marked as follows:
    “Lens filter type” “Lens scale number” “Identification of the distributor/maker” “Optical class” “Impact resistance (mechanical strength)” “Certification Mark” “Other marking”

    Filter Type
    2/2C - UV (2C doesn’t affect colour recognition)
    4 – IR Filter
    5/6 - Solar Filter
    Lens Scale Number
    2.1,2/3.1,2 – Indicates this eyewear is intended for use with UV filter (with or without
    good colour recognition) up to a scale number of 2-1.2 or 3.1,2 (goggles only)
    1.2 - Clear or Amber
    1.4 - Blue or I/O Waterproof
    1.7 - Minimises or I/O
    2.5 - Grey or Revo
    3.1 - Dark Grey or Mirror

    Optical Class
    1 – Indicates class 1 optical quality (High Quality)
    2 – Indicates class 2 optical quality
    Impact Resistance (Mechanical Strength)
    F - Low energy impact resists a 6mm, 0.86g ball at 45m/s
    B - Medium energy impact resists a 6mm, 0.86g ball at 120m/s
    A - High energy impact resists a 6mm, 0.86g ball at 190m/s
    S – Increased strength
    Please Note: If the impact letter is NOT followed by the letter “T”, then the eye protection shall only be used at room temperature and NOT extreme temperatures.


    Other Markings
    K - Resistant to surface damage by fine particles
    N - Resistant to fogging